PON is a mature optical fiber access network technology, which integrates the advantages of low cost, high bandwidth, strong expansibility and other advantages. It adopts the passive spectral network and point-to-multipoint structure, which changes the problems existing in the active optical network such as many fault points, difficult maintenance and high operating costs.
ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function . It is compact and compact, and is an FTTH optical network unit with high performance and low power consumption.ONU can automatically switch EPON/GPON working mode and can be used in EPON/GPON network, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.
Hardware Specifications | |
Size(L*W*H) | 90mm (L) ×90mm (W) ×24mm (H) |
Optical signal access | EPON/GPON |
User interface | 1GE |
Indicator light | POWER/PON/LOS/LAN |
Button | Power switch Button, Reset Button |
Weight | 95g |
Power adapter input | 100V~240V AC,50Hz~60Hz |
PowerSupply requirement | 12V DC,0.5A |
Power consumption | <6w |
Working temperature | -10°C ~ +45°C |
Environment humidity | 5% ~ 95% (Non-condensing) |
PON Interface | |
Module type | SC/UPC |
Working wavelength | up 1310nm,down 1490nm |
TX Optical power value | 0.5~4dbm |
RX Optical power sensitivity | -27dBm |
Transmission distance | 0~20km |
Transmission rate | GPON:Uplink 1.244Gbps;downlink 2.488Gbps EPON:Uplink 1.244Gbps;downlink 1.244Gbps |
Ethernet interface | |
Interface type | RJ45 |
Interface parameters | 1 x 10/100/1000Mbps auto adaptive Ethernet interfaces |
GPON working mode Compliance with IEEE 802.3ah & itu-t g.984.x standard
Chipset: Realtek 9601D
GPON:8 T-CONTs,32 GEM Ports
EPON working mode compliant with IEEE 802.3ah specification and OAM protocol
Supports the WEB configuration function
Support SFU and HGU types, can switch to use each other
HGU type,Support PPPoE/ Static IP/ DHCP
Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
Layer 3 Home Gateway/CPE features with Hardware NAT, supports Route mode, etc
Supports the configuration of Ethernet interface rates, working modes,MDI/ MDIX auto-negotiation mode, and Pause flow control
Provides performance statistics on all Ethernet lines
Support multicast IGMP snooping
Supports the L2 wire speed forwarding
Supports the AES-128 algorithm for data encryption of downlink data